The molding powder is mixed with water. After the mold has set for about 75 seconds, the baby`s foot or hand is placed in the molded container. Swing the baby`s foot (or hand) from the molding material.
The cast stone bag is mixed with water and the foundry mixture is poured into a mold. Allow the cast stone to harden for two hours.
Rip the template and remove the statue.
Paint and enjoy!
The package includes:
100g x molding powder
100g x plaster
1 x powder (gold lacquer/silver lacquer lacquer/pearl lacquer)
1 x brush
Note: The frame is not included. This is generally only enough for a baby double or a foot.
Dosage:
0-1 years: One hand (50g) one foot (100g)
1-2 years:One hand (100g) one foot (150g)
2-3 years:One hand (100g) one foot (200g)
3-5 years:One hand (200g) one foot (250g)
Adult:One hand (300g)
Couple hands:One hand (600g)
Steps:
1. Take clone powder 50 grams, add 1.2-1.5 times the volume of water mixed, mixing, then cloning powder and water mixture into a purple paste liquid, stir it, about 1 minute or so purple gradually receded, immediately Baby`s little hands or feet into the liquid, the baby`s little hands or feet must be soaked in the liquid inside, do not stick to the walls of the cup, while ensuring that the baby`s hand or feet do not move, about 2 and a half times the liquid will solidify, please Keep 4 minutes and then remove the baby`s hand or feet, can be removed before and after the move, let the air go, slowly removed.
2. Take the model powder 50 grams, add 1 / 3-1 / 2 of water, water do not put too much, as long as the powder and water mixture into a liquid, the more concentrated the better, even after mixing, slowly poured into the colloid , Down a little, Akira look, to avoid the gas plug in the inside.
3.2-5 hours after the or hand can be used to slowly open the colloid, must be carefully poke, not anxious.
(Note: the surface of the work of a little powder can be rinsed with water, placed in a ventilated place to dry, it is recommended to dry for more than 24 hours.)
4. Color: like to paint what color to give their own works painted what color it
Important: Do not add too much water to the powder mixture or they will not be set correctly and your casting will not succeed.