20A Switching Voltage Regulator SBEC UBEC 2-12s Input Two Lines 5.0V/7.4V/8.4V/9V/12V Output for RC Airplane Car Boat DIY Model
Input voltage: 6V-50.4V(2-12S LIPO)
Output voltage: (Sales Optional)
Option 1: 5.0V/5.5V/6.0V/7.0V/9.0V
Option 2: 7.4V/8.4V/9V/12V
(adjustable by the jumper plug, two lines output in same votage)
Current: 20A Max
Weight: 30g
Size: 45x 26 x 21mm (LxWxH)
1. Adopting the world`s most advanced switching power supply main control chip design, with ultra-low impedance high-power FET, with over-current protection function;
2. Small size, light weight, maximum output current of 20A, and extremely strong load capacity. It is the first domestic UBEC with high current output;
3. Using high-power brand components, product performance is stable and excellent;
4. Output voltage can be selected by short-circuit plug (jumper);
5. The dual-wire output is equipped with a professional filter magnetic ring, which greatly reduces electromagnetic interference and wire internal resistance, and ensures the normal operation of the load;
6. Wide voltage working range, which can work normally within 6V-50.4V;
7. Stable operating frequency: 100% duty cycle (Duty Cycle)
8 .Fully enclosed inductors are used to greatly reduce electromagnetic interference.
Notice Please:
In order to make better use of the product performance, when using a short-circuit plug (jumper) to switch the output voltage, please operate with the input voltage disconnected, so as not to bring you unnecessary trouble.
Although various measures have been adopted to reduce electromagnetic interference, a small amount of electromagnetic interference cannot be completely avoided when the Switch BEC in the switching regulator mode is working. To ensure the normal operation of the receiver, please keep the distance between the output filter magnetic ring and the main control board as far as possible when using the Switch BEC (the output filter magnetic ring cannot be stacked on the main control board), and keep the entire Switch BEC as far away as possible Receiver.
Option 1:1X 20 UBEC w/ output voltage 5.0V- 9.0V
Option 2: 1X 20 UBEC w/ output voltage 7.4V-12V
.