Features:
Material: EPS paper
Scale: 1:350
Cards Pages: 30
Instruction Language: japnese or english, due to the instruction pages are too many, default we send electronics file version to your mail address, if you want paper instruction, price will be much higher.(the electronics and paper instruction are totally the same, just printed on paper)
Difficulty: **** (6 star is max)
Please Note:
1 what you receive is not finished product, it need you to cut, paste and assemble.
2 this paper model`s instruction is Electronics file version, please leave us your mail address after you put your ourder, we will send it to your mail.if you do want paper instruction, the price will be higher, please choose the second item.
Russian Friend Pay Attention Please !
- Please fill in receiver`s full name(your name,father name,family name) in the order due to new policy of Russian customs
Shipping Methods:
1 China Post Ordinary Small Packet Plus: can not be tracked and slower.
2 ÇØ¿Ü standard,E-Packet, China Post Registered methods: can be tracked and much faster.
We suggest to use ÇØ¿Ü standard methods if possible.
Parts of the instructions:
5. Apply glue to the section of the horizontal tailpiece made in 4, shown in red, and bond it to the fuselage.
Assemble the other side in the same way.
6. Cut the main leg and fold it according to the assembly design drawing, and bond the back side to each other.
7. Attach the parts made in 6 to the lower part of the main wing. Adhere on the other side as well.
8. Cut out the tank (external fuel tank) and bond the backside to each other. This part is not mandatory. Even without installation it is OK.
9. Apply glue to the section shown in red and bond it to the fuselage.
11. In the same way, assemble a ninety-seven type shipbuilding bomber.
12. In the same way, assemble a 1997 type ship attack aircraft.
Please note that the torpedo attached to the bottom is slightly left from the center of the aircraft as seen from the bottom.
4. Adhere the upper part to the arrow part of each sponson of the hull.
5. Put the parts made of in the specified position.
6. a flight deck Place the parts made from on the flight deck with reference to the picture below. (I will not bond) The
hull itself is complete.
13. Adhere the upper part to the position of the arrow of the part made of 9. Adhere on the other side as well.
It will be like this.
18. Adhere the upper part to the position of the arrow of the part made in 13.
19. Cut out "174" in the development drawing, fold according to the assembly designation drawing, and bond the arrows.
20. Adhere the upper part to the position of the arrow of the part made in 18. Please be careful not to mistake the top and bottom.
21. Adhere the upper part to the position of the arrow on the flight deck.
23. Adhere the upper part to the position of the arrow at the top of the bridge.
24. Cut out the two pieces of "176" in the developed drawing, fold them according to the assembly designation drawing, and bond the back side to each other.
25. Adhere the upper part to the position of the arrow at the top of the bridge.
26. Cut out the four pieces of "177" in the developed drawing, fold them according to the assembly designation drawing, and bond the back side like 24 as well. I will nip this two.
27. Attach the above parts to the two positions of the arrow, in front of the bridge.
32. Cut out "181" and "182" in the developed drawing, fold according to the assembly designation drawing, and bond the back side to each other. Be careful not to paste the parts shown in red.
It will be like this. Bending it in a wavy shape as if flapping its part in the wind makes it more realistic.
33. Adhere the upper part to the place indicated by the arrow of the part made of 31.
34. Adhere the upper part to the position of the arrow at the rear of the bridge.