ZMR 8A UBEC V1 V2 V4 2-6S / V3 4-8S Dual BEC Voltage Regulator Module
100% Brand new and high quality!
1. The advanced synchronous rectifier chip has the function of over-current and over-heat protection, and the conversion efficiency is over 93%.
2. High quality conversion chip greatly reduces electromagnetic interference. Ensure the normal operation of the receiver.
3. It has a working state indicator. When the output is normal, the indicator is always on.
4. It has an external power-off switch, which is more convenient to use. When this switch is not needed, it can be removed directly.
5. The shell is printed in 3D, beautiful and durable.
6. The input and output wires are all made of super-long high-quality silica gel wires, which are easy to install.
8A UBEC V1 Specification:
1. Input voltage: 2-6S Lipo (7-25.5V).
2. Output voltage: One way 7.4V fixed output / Another way 5V/6V/7.4V is optional.
3. Continuous output current: 8A
4. Peak output current: 12A (duration not exceeding 15 seconds)
5. Input wire: No. 16 silica gel wire, length 30CM
Output wire: No. 22 multi-core silica gel wire, length 30CM
6. Size: 50X50X11.5mm
7. Weight: 50g
8A UBEC V2 Specification:
1. Input voltage: 2-6S Lipo (7-25.5V).
2. Output voltage: One way 5V/7.4V/8.4V is optional / Another way 5V/6V/7.4V is optional.
3. Continuous output current: 8A
4. Peak output current: 12A (duration not exceeding 15 seconds)
5. Input wire: No. 16 silica gel wire, length 30CM
Output wire: 22 multi-core silica gel wire, length 30CM
6. Size: 50X50X11.5mm
7. Weight: 50g
8A UBEC V3 Specification:
1. Input voltage: 4-8S LiPo (15-36V).
2. Output voltage: One way 12V fixed output /Another way 5.2V/6V/7.4V/8.4 route is optional.
3. Output Current: 5.2-8.4V: 8A Instantaneous 16A
12V: Continuous 4A Instantaneous 6A
4. Input wire: No. 16 silica gel wire, length 30CM
Output wire: 22 multi-core silica gel wire, length 30CM
5. Size: 49X46X11.5mm
6. Weight: 50g
Notes: When using 12V output, please use batteries above 4S.
The V4 module is specifically designed for RC gasoline engines
Features:
1, working voltage: 3-6S
2, continuous current: 8A. Maximum instantaneous current: 12A
3, using advanced signal isolation technology, you can use a battery to power the receiver and CDI at the same time, without interference.
4, the receiver has 5V/7.4V/8.4V/ third adjustable voltage.
5, has a remote flameout function.
6, with two external power-off switches, can separately power off the receiver and CDI.
Note:
1, please do ground test first, then fly.
2. Keep the module and receiver and CDI at a distance of more than 10CM.
3, please set the remote control out of control protection.
Technical video£ºhttps://v.youku.com/v_show/id_XNDMwNTg0Mjg2NA==.html?spm=a2h3j.8428770.3416059.1&qq-pf-to=pcqq.c2c